网站首页

脉冲辉光放电等离子体及其发光特性 等硕士生报告

来源: 作者: 发布时间:2015-12-23

邀请人:

报告人:

时间: 2015-12-23

地点:

主讲人简介:

物理学院“博约学术沙龙”系列报告 (总第 110期)

时  间:   2015年12月24日(星期4)下午3:00
地  点:   中心教学楼610
报告一:硕士生报告    时间:15:10-15:40
题  目:脉冲辉光放电等离子体及其发光特性
报告人:刘远野                   指导老师: 欧阳吉庭
摘要:
Plasma light source is one of the most widely used lighting tools. The plasma light is famous for its high efficiency, good color rendering index and full range of types. Because of its low price-performance ratio, the plasma light source has an irreplaceable role in both road illumination, production lighting and our daily life. This thesis focuses on the process of glow discharge and its features, as well as the impact of different factors on optical properties and electrical characteristics of pulsed glow plasma light source.
Firstly, the influence of voltage and frequency on the low pressure glow discharge has been studied, and the process of the discharge has been explained. By the voltage waveform, current waveform and the images through experiment, the changes of voltage and current and the evolution of striation in pulsed glow discharge is analyzed; and the striation in positive column has been observed.
Then, the PIC/MCC dynamics simulation of pulsed glow discharge tube is also used to make a further investigation and explanation of the instability phenomenon in positive column in plasma discharge tube by the spatio-temporal distribution of Ar+ and potential, and the energy distribution of electrons.
At last, we also study the light emission characteristics of Ar discharge tube. The influence of the frequency of drive source, the length and diameter on optical properties and electrical characteristics of pulsed glow plasma light tube have been tested.
By the study of performance of pulsed glow plasma light source , we determine the reliability of its work condition, reveal the relationship between voltage, current, frequency and its start and normal work condition,and it’s a big step to improve the startup structure of plasma light source.

报告二:硕士生报告    时间:15:40-16:10
题  目:线-板电晕放电离子源的结构设计和稳定性研究
报告人:    夏清               指导老师: 缪劲松
摘要:
随着离子迁移谱仪技术的发展,以电晕放电为离子源的离子迁移谱仪正在逐渐替代以放射源为离子源的离子迁移谱仪。而关于电离源的特性和实现需要进一步的研究。本文将从这一角度入手,探究不同的放电参数对电晕离子流的影响。如:不同放电结构的影响,不同环境因素的影响等,进而找出离子源工作的最佳条件,并设计制作一种电晕离子源。


时  间:   2015年12月24日(星期4)下午3:00
地  点:   中心教学楼610
报告三:硕士生报告    时间:16:10-16:40
题  目:氩气针- 环介质阻挡放电等离子体射流的特性
报告人:田伟静                   指导老师:欧阳吉庭
摘要:
大气压低温等离子体射流是近年来兴起的一种新型大气压低温等离子体放电技术,是目前国际上等离子体科学与应用领域的研究热点之一。大气压低温等离子体射流在电极结构和物理特性方面有许多独特优势,等离子体射流产生在放电区域之外,解除了放电区域大小对被处理物尺寸的限制,可以在开放空间对体积较大或者形状复杂的材料进行三维操作;等离子体射流的温度接近或略高于室温,很大程度减少了高温对被处理物表面带来的热损伤;同时,大气压等离子体装置不需要真空条件,可以在开放环境中进行工作,操作便利,成为大气压下产生非平衡等离子体的重要方式。本文主要研究了驱动电压、氩气流量、气体组分、针尖曲率半径对射流长度、放电电流、耗散功率等特性的影响,射流的时间发展过程,并进行光谱诊断,证实在针-环结构下随电压增加放电存在两种不同的模式,放电过程类似于正电晕放电。


报告四:博士生报告    时间:16:40-17:10
题  目:石墨烯量子反常霍尔效应体系中的量子干涉效应
报告人: 唐 娟                 指导老师: 邢燕霞
摘要:新兴材料石墨烯具有优良的热学、电学和光学性质,在量子器件方面有非常大的应用价值,因而石墨烯自从问世以来就受到了广泛的关注。在外在Rashba自旋轨道耦合和交换场的共同作用下,石墨烯会发生拓扑转变,产生量子反常霍尔效应。通过紧束缚模型和非平衡格林函数方法研究发现,在弱磁场作用下,经历两次反射的量子反常霍尔边缘态会在石墨烯散射腔内发生周期性干涉,干涉周期和穿过散射腔的磁通成反比。此外,干涉效应对杂质散射和体态非常敏感,因此,通过观测量子干涉效应可以定性地判断体系是否存在真正的边缘态。

联系方式:物理学院办公室(68913163)
更多信息请关注物理学院网站physics.mylpg.net